Skip to content

Compare physical quantities¤

Normalizes physical quantities. Can either convert to a configured unit or to SI base units. For instance for lengths, values will be converted to metres if no target unit is configured. Will output the pure numeric value without the unit. If one input is provided, the physical quantities are parsed from the provided strings of the form “1 km”. If two inputs are provided, the numeric values are parsed from the first input and the units are parsed from the second inputs.

SI units and common derived units are supported. The following section lists all supported units. By default, all quantities are normalized to their base unit. For instance, lengths will be normalized to metres.

Supported units¤

Time¤

Time is expressed in seconds (symbol: s). The following alternative symbols are supported: * mo_s: day29.53059 * mo_g: year/12.0 * a: day365.25 * min: min * a_g: year * mo: (day365.25)/12.0 * mo_j: (day365.25)/12.0 * a_j: day365.25 * h: h * a_t: day365.24219 * d: day

Length¤

Length is expressed in metres (symbol: m). The following alternative symbols are supported: * in: c(cm254.0) * nmi: m1852.0 * Ao: dnm * mil: m(c(cm254.0)) * yd: ((c(cm254.0))12.0)3.0 * AU: m1.49597871E11 * ft: (c(cm254.0))12.0 * pc: m3.085678E16 * fth: ((c(cm254.0))12.0)6.0 * mi: ((c(cm254.0))12.0)5280.0 * hd: (c(cm254.0))4.0

Mass¤

Mass is expressed in kilograms (symbol: kg). The following alternative symbols are supported: * lb: lb * ston: hlb20.0 * t: Mg * stone: lb14.0 * u: AMU * gr: (mg6479891.0)/100000.0 * lcwt: lb112.0 * oz: oz * g: g * scwt: hlb * dr: oz/16.0 * lton: (lb112.0)20.0

Electric current¤

Electric current is expressed in amperes (symbol: A). The following alternative symbols are supported: * Bi: daA * Gb: cm·(A/m)*250.0/[one?]

Temperature¤

Temperature is expressed in kelvins (symbol: K). The following alternative symbols are supported: * Cel: ℃

Amount of substance¤

Amount of substance is expressed in moles (symbol: mol).

Luminous intensity¤

Luminous intensity is expressed in candelas (symbol: cd).

Area¤

Area is expressed in square metres (symbol: m²). The following alternative symbols are supported: * m2: m² * ar: hm² * syd: ((c(cm254.0))12.0)3.0² * cml: [one?]/4.0·m(c(cm254.0))² * b: hfm² * sft: (c(cm254.0))12.0² * sin: c(cm*254.0)²

Volume¤

Volume is expressed in cubic metres (symbol: ㎥). The following alternative symbols are supported: * st: [㎥?] * bf: (c(cm254.0)³)144.0 * cyd: ((c(cm254.0))12.0)3.0³ * cr: ((c(cm254.0))12.0³)128.0 * L: L * l: l * cin: c(cm254.0)³ * cft: (c(cm254.0))*12.0³ * m3: ㎥

Energy¤

Energy is expressed in joules (symbol: J). The following alternative symbols are supported: * cal_IT: (J41868.0)/10000.0 * eV: J1.602176487E-19 * cal_m: (J419002.0)/100000.0 * cal: m(J4184.0) * cal_th: m(J*4184.0)

Angle¤

Angle is expressed in radians (symbol: rad). The following alternative symbols are supported: * circ: [one?]·rad2.0 * gon: ([one?]·rad/180.0)0.9 * deg: [one?]·rad/180.0 * ': ([one?]·rad/180.0)/60.0 * '': (([one?]·rad/180.0)/60.0)/60.0

Others¤

  • 1/m, derived units: Ky: c(1/m)
  • kg/(m·s), derived units: P: g/(s·cm)
  • bit/s, derived units: Bd: bit/s
  • bit, derived units: By: bit*8.0
  • Sv
  • N
  • Ω, derived units: Ohm: Ω
  • T, derived units: G: T/10000.0
  • sr, derived units: sph: [one?]·sr*4.0
  • F
  • C/kg, derived units: R: (C/kg)*2.58E-4
  • cd/m², derived units: sb: cd/cm², Lmb: cd/([one?]·cm²)
  • Pa, derived units: bar: Pa100000.0, atm: Pa101325.0
  • kg/(m·s²), derived units: att: k(g·(m/s²)*9.80665)/cm²
  • m²/s, derived units: St: cm²/s
  • A/m, derived units: Oe: (A/m)*250.0/[one?]
  • kg·m²/s², derived units: erg: cm²·g/s²
  • kg/m³, derived units: g%: g/dl
  • mho
  • V
  • lx, derived units: ph: lx/10000.0
  • m/s², derived units: Gal: cm/s², m/s2: m/s²
  • m/s, derived units: kn: m*1852.0/h
  • m·kg/s², derived units: gf: g·(m/s²)9.80665, lbf: lb·(m/s²)9.80665, dyn: cm·g/s²
  • m²/s², derived units: RAD: cm²·g/(s²·hg), REM: cm²·g/(s²·hg)
  • C
  • Gy
  • Hz
  • H
  • lm
  • W
  • Wb, derived units: Mx: Wb/1.0E8
  • Bq, derived units: Ci: Bq*3.7E10
  • S

Characteristics¤

This distance measure is not normalized, i.e., all distances start at 0 (exact match) and increase the more different the values are.

Compares single values (as opposed to sequences of values). If multiple values are provided, all values are compared and the lowest distance is returned.

Examples¤

Notation: List of values are represented via square brackets. Example: [first, second] represents a list of two values “first” and “second”.

Convert SI unit prefixes:

  • Input values:

    • Source: [1 km]
    • Target: [500 m]

  • Returns: 500.0

Convert imperial and metric values:

  • Input values:

    • Source: [1 km]
    • Target: [1 mi]

  • Returns: 609.344

Validate if the compared units of measurement are compatible:

  • Input values:

    • Source: [1 km]
    • Target: [1 kg]

  • Returns: NaN

Parameter¤

Number format¤

The IETF BCP 47 language tag, e.g., ‘en’.

  • Datatype: string
  • Default Value: en

Comments